Guidewire Cycle Time Reduction | Glebar CAM.2
Challenge
The challenge was to reduce cycle time while achieving a sharp, precise corner geometry on a medical guidewire.
Process
The Glebar CAM.2 Micro Grinder offers multiple configurable operating modes to accommodate different guidewire geometries, and this application used a combination of modes to meet the customer’s requirements.
In the first mode, a profiled grinding wheel maximizes material removal during taper transitions, reducing cycle time for the majority of the grind. While most guidewires feature linear tapers, this application required sharp transitions with an abrupt diameter change, a geometry standard linear grinding cannot achieve without sacrificing cycle time. A secondary spindle with a dedicated grinding wheel was installed to address this challenge, with the primary wheel configured for rapid material removal and the secondary wheel configured specifically to produce the sharp corner geometry. This dual-spindle approach reduced part-to-part cycle time by 2x. A programmable part extractor (PPE) was also incorporated to rapidly and accurately reposition the wire to the start of each subsequent part, enabling multiple parts to be run from a single length of wire and further reducing overall cycle time.
Contact an EngineerSolution: Glebar CAM.2 Micro Grinder
The Glebar CAM.2 Micro Grinder is purpose-built for small, complex precision medical applications including medical guidewires, radiuses, needle points, and non-linear shapes. It enables previously unproducible part geometries with minimal setup time and limited operator training. Glebar’s patented dual-carriage linear motor feed system maintains absolute control of position, speed, and rotation throughout the grind, delivering high diameter and length accuracy even on the most demanding geometries.