Burr-Free Cutting of Steel Tubes | CS1-E
Challenge Tubes are cut one at a time using a standard abrasive cutting saw which leaves burrs. Requires secondary process of wire brushing and tumbling to deburr tubes and remove […]
Arthroscopic Shavers (Outer Sleeve | GT-610 )
Challenge: To grind two mating metal components, with a tight clearance requirement between their surfaces, to create a powered arthroscopic shaver used in orthopaedic joint surgeries. Solution In this application, two […]
Trocar Points | CAM.2
Challenge: To process trocar points automatically where small lot sizes require frequent equipment changeover. Solution Using the CAM.2 machine with full axis control on rotation and infeed of a part, a […]
State-of-the-Art Plunge Grinder Increases Efficiencies in Grinding Melamine Fuse Bodies | PG-9DHD
Current Process The melamine fuse bodies are ground using a legacy hydraulically operated centerless form grinder. Decades of use have prompted customers to replace existing machines with newer versions. Challenges […]
Thru-feed processing of Carbide Cutting Blanks | GT-610 EZ
Glebar Company’s position in the machine tool industry is driven by its solution orientated leadership and skilled engineering staff. Market studies have indicated a healthy growth cycle in the specialty […]
Circuit Board Drill Blanks | DD-7
Challenge: To end grind printed circuit board carbide drill blanks used by a major tool manufacturer to qualify the blank before fluting. The existing method relied on a batch process where […]