The CR-240-SA Stent Crimping Machine is developed for the crimping and transfer into the delivery system of self-expandable stents up to 200 mm length with a maximum diameter of approx. 30 mm.
- Double camera system integrated
- Servo controlled stent crimping head with Zero Gap technology
- Exchangeable pusher rods and delivery system holders for
various stent diameters - 15.5” user interface with recipe control
- The CR-240-SA is built with a very high-quality benchmark
resulting in a stable and robust design with minimal cost of
ownership. - The stent crimper can be easily calibrated using the one-point
automatic diameter calibration function built into the system.
Calibration in seconds. - Full process data logging to the internal PC system and
transfer possible to external USB for registration or analysis
Technical Specs
Stent crimping length | 240 mm head. Maximum 200 mm length stents |
Stent type | Self-expandable stents (also for covered stents) |
Maximum diameter loading | 30 mm (optionally larger sizes possible) |
Maximum opening crimp head | 35 mm |
Minimum closing diameter | 0.1 mm (software limit) |
Crimp head control | Servo controlled position / force |
Diameter accuracy | +/- 0.02 mm @ 100 N |
Maximum crimp force | 1000 N radial. Dynamic Diameter Compensation possible |
Crimping speeds | 0.1 mm/s – 10 mm/s |
Maximum transfer force | 200 N with loadcell measurement on the pusher |
Stent loading | Manual (with optional aid of two microscope cameras) |
GUI | 15.5” colour touch panel |
Control software | Zoomable process graphs Recipe based Password levels (operator, engineer, calibrator) Data logging with USB transfer possibility |
Ethernet | 2x |
USB | 2x |
Required air pressure | 7 bar minimum |
Power supply | 115 / 240 VAC / 0.5 kW |
Safety systems | Covers with coded magnets and safety PLC system and double hand control system. |
