Forming
Drug Eluding Stent Crimping: CRF-200-PS
The MPT CRF-200-PS is a stable stent crimping system with film protection for the processing of drug-eluting self-expandable stents. It combines a unique 4-film protection system with the stable MPT Europe 8-blade stent crimper design.
The CRF-200-PS stent crimping system uses a clean piece of PET film for each stent crimp, protecting the system from coating residues and ensuring no cross-contamination of drug coating between stents, making it the only reliable way to crimp DES products.
The fully servo-controlled crimper features an intuitive 13-inch touch-screen graphical user interface that provides complete control over the crimping and loading process, with recipe-based control and barcode-scanner connectivity for seamless production management. The system displays real-time crimping and loading force measurements on dynamic, user-selectable graphs for full process visibility.
The four thin 0.012 mm PET films are routed in a specific layout, safely capturing any drug coating lost during crimping and loading between the films and storing it at two waste roller systems. Optional transfer plate technology provides stable, secure stent transfer from the crimping head to the delivery system.
Film feed-through lengths are fully programmable, and two small inspection windows at the top of the machine allow easy post-crimping film inspection. The film exchange system is optimized for speed and simplicity, with a typical film loading procedure taking under 10 minutes.
Product Details
Key Features
- Graphical User Interface for easy access to process cycle options with a large 13-inch full-color touch panel interface.
- Fast, strong, full servo-controlled axes for repeatable, reliable transfer of stents into the delivery systems.
- Integrated safety light with intuitive user interaction.
- Fully enclosed with a manual sliding door.
- Unique 4-film routing with easy feed-through and setup is the only reliable way to ensure no cross-contamination of stents.
- The CRF-200-PS is built to a very high-quality benchmark, resulting in a stable, robust design with minimal cost of ownership.
- The machine has a self-supporting frame, with integrated electrical and pneumatic components for easy access and maintenance.
- The machine can connect to the internet for online support and updates from MPT Europe BV.
- Stent loading with push or pull system.
- The crimp head can be heated and/or cooled.
Specs
- Stent Crimping Length: 200 mm head. Maximum 180 mm length stents
- Stent Type: Self-expandable stents (also for covered stents)
- Maximum Diameter Loading: 17.5 mm (optionally larger sizes possible)
- Maximum Opening Crimp Head: 35 mm
- Minimum Closing Diameter: 0.1 mm (software limit)
- Crimp Head Control: Servo-controlled position/force
- Diameter Accuracy: ± 0.02 mm @ 100 N
- Maximum Crimp Force: 2,000 N radial. Dynamic Diameter Compensation possible
- Crimping Speeds: 0.1 mm/s – 10 mm/s
- Maximum Transfer Force: 500 N with load-cell measurement
- Film Width and Type: 202 mm wide PET film (0.012 mm thickness)
- GUI: 13-inch color touch panel
- Control Software: Zoomable process graphs, recipe-based, password levels (operator, engineer, calibrator), remote support option
- Indicators: Optional signal light/acoustic alarm (user programmable)
- Ethernet: 2x
- USB: 4x
- Required Air Pressure: 7 bar minimum
- Vacuum System for Waste Coating: 50 mm outlet to connect a waste vacuum system
- Power Supply: 115 or 240 VAC / 2 kW
- Heating System: Optional heating system (up to 60°C)
- Cooling Circuit: Optional cooling system (+10°C) or low temperature (-15°C)
- Safety Systems: Sliding door with safety contacts and intuitive operator feedback