Join Our Email List

Catheter Manufacturing

BACK TO CASE STUDIES PAGE

Automatic CT Mandrel Puller

09.05.2023 R&D Engineering Catheter Manufacturing Mandrel Removal
CT MANDREL PULLER is a simple machine designed to pull out/remove  mandrels from any type of catheter tubing. This machine can be equipped with either Servo or Pneumatic controls depending on operational needs. We have several different ways to grip the mandrels and offer mandrel handling after the unit is completed. SpecsPulls solid or stret...
Read More

Liner Stretcher

09.05.2023 R&D Engineering Liner stretcher Catheter Manufacturing
The CATH-TECH™ Liner Stretcher uses a combination of heat and tension to process a liner to a fixed mandrel. This automated process eliminates the need for the operator to hand stretch a liner. Our CATH-TECH Liner Stretcher and its process allow the liner to sit tight against the mandrel with minimal relaxation. Because of t...
Read More

Tooling: Skiver

09.05.2023 R&D Engineering Heat Shrink Removal/ Skiving Catheter Manufacturing
The CT Skiver is a customized tool that cuts between the catheter tubing and applied heat shrink layers and separates them, removing the heat shrink material.SpecsEach unit is hand polished, and features are blended to allow the unit to smoothly move through the materialStandard material offerings are 416 or 440 Stainless Steel,...
Read More

Catheter Drilling and Cutting System

08.30.2023 Drilling/Cutting Catheter Manufacturing Syneo
SYNEO's Automated Catheter Drill and Cut systems allow engineers to produce finished, drilled and precision cut-to-length catheter components in a continuous and fully automated manufacturing process. Raw materials can be presented to the machine manually or automatically, in either spool or stick form, with the corresponding SYNEO Accu-Feed syst...
Read More

924 Coil winder: Multi Filar

08.29.2023 Engineering By Design (EBD) Coil Winding Catheter Manufacturing
https://youtu.be/UuGC-HOeRGk This coil was formed by winding 12 individual .0045″ diameter wires over a .035″ diameter spinning mandrel.The 924 Multi-Filar Coil Winder machine uses a camera vision system to wind fine filaments around a spinning mandrel and produce multi-filar micro coils with up-to 4 filars. After...
Read More

Coil Winder: 503 Single Filar

08.29.2023 Engineering By Design (EBD) Coil Winding Catheter Manufacturing
EBD Coil winding technology is developed specifically to wind micro coils for minimally invasive medical devices. Delivers the ability to wind coils using filament as small as .001" diameter on a .004" mandrel using our innovative closed-loop filar tension control system. The machine flexibility enables the filar tension to be recipe controlled fro...
Read More

Catheter Laminating Reflow Machine

08.29.2023 Catheter Lamination/Reflow R&D Engineering Catheter Manufacturing
Cath-Tech (CT) Reflow Chamber The Cath-Tech (CT) Reflow Chamber is a precision catheter laminating machine designed for consistent, high-quality results. It uses a tightly controlled heated chamber that moves along the tubing at a regulated speed to produce uniform laminations across medium- to long-length catheter shafts. To im...
Read More

Catheter Laminating: Reflow Clam Shell

08.29.2023 Catheter Lamination/Reflow R&D Engineering Catheter Manufacturing
The CT Reflow Clam machine differs from the CT Reflow Chamber machine because of its ability to be programmed to skip over various parts of a catheter assembly, therefore removing heat from designated parts of the catheter. The CT Reflow Clam uses a split die design that opens and closes around the needed parts where heat is nec...
Read More

Catheter Laminating: Reflow Roller

08.29.2023 Catheter Lamination/Reflow R&D Engineering Catheter Manufacturing
The R&D Engineering Reflow Roller boasts eight (8) chambers that continuously feed the product, and enable a quick transition between loads by the operator. This easy-to-control, compact machine is not suitable for micro wall systems less than <2000 of an inch. SPEC SHEET ...
Read More

Catheter Tipping: R&D Radio Frequency

08.29.2023 Catheter Tipping, Flaring R&D Engineering Catheter Manufacturing
Our Radio Frequency Tipping Machine uses RF energy which improves application processing speed as it automatically starts at the desired temperature. Additionally, it provides more flexibility to the dies when needed.SpecificationsTypically uses 120 V system, options to use 208-240 vac. single, or 3 phase.Additional specs can be...
Read More

Catheter Tipping: Quantum

08.29.2023 Cathtip Catheter Tipping, Flaring Catheter Manufacturing
The Quantum is a tabletop tipping machine designed to produce superior outputs expected of the CATHTIP standard. Our state-of-the-art, precision catheter forming systems produce the highest quality parts with speed and consistency. Achieve flashless tips, smooth bonds, and exacting geometry with virtually all thermoplastic materials. Produce a ...
Read More

Catheter Tipping: Magnum

08.29.2023 Cathtip Catheter Tipping, Flaring Catheter Manufacturing
The Magnum provides the most flexible RF architecture on the market, capable of tip forming, flaring, and bonding in R&D or production settings. Our state-of-the-art, precision catheter forming systems produce the highest quality parts with speed and consistency. Achieve flashless tips, smooth bonds, and exacting geometry with virtually all...
Read More

Tools: Tipping Dies & Hole Forming Drills

08.29.2023 Catheter Tipping Catheter Manufacturing Syneo
Catheter Hole Punching Drills Flow-Thru™ Catheter Hole Forming Drill BitsAttain the highest quality hole appearance and reduce manufacturing costs. Enjoy fast throughput and infrequent drill bit changes.Benefit from CATHTIP’s proprietary Flow Thru™ hollow design drills in your high volume production environment....
Read More

Catheter Laminating: 311

08.29.2023 Engineering By Design (EBD) Catheter Lamination/Reflow Catheter Manufacturing
EBD Quad Catheter Laminator shrinks catheter tubing faster than the competition. Designed for vertical operation, its patented hot air circulation process contains the heat within the system, maximizing the time at temperature for faster processing. By improving the accuracy of all controlled parameters, this machine can increas...
Read More

Hole Drilling: Accu-Drill SD

08.29.2023 Catheter Hole Forming/Punching Catheter Manufacturing Syneo
The Automated Catheter Hole Making solutions are powerful and safe solutions to hole-making needs of various shapes and sizes. Four models, ranging from one to four axes, allow for repeatable patterns of round, oval, and other shaped holes. The automated catheter hole punching and automated medical tube drilling equipment utilize quick-change t...
Read More

Hole Drilling: Accu-Drill MD

08.29.2023 Catheter Hole Forming/Punching Catheter Manufacturing Syneo
The Manual Hole-Making solutions punch or drill precision holes in a variety of extruded tubing and injection molded applications. These manual catheter hole punching and manual medical tubing drilling machines are designed utilizing an arbor or drill press foundation, and are best suited for high-mix, low volume production, and...
Read More
Complete this brief form to get in touch with a member of our team.

Let’s Build Something Together.

get in touch

Innovation without limitation.

mmt-inc.com
Privacy Settings

© 2025 MMT | Medical Manufacturing Technologies. All Rights Reserved.