Interface

 Interface Catheter System Model LMS-100 is a bench-top measurement system designed specifically for catheter balloons. The system offers a non-contact solution to the typical problems encountered in the dimensional measurement of catheter balloons. By integrating the holding, pressurizing, and movement of the balloon with cutting edge, non-contac...
 The Extrusion Die Stretching Machine (figure 1) performs hot die draw-down of plastic tubing used in catheter production. Three different models are available, 3x26, 3x68, and 3x80, letting you maximize your workspace based on the tube extrusion requirements. The process enhances material strength and improves O.D. tolerances. The machine can pro...
The Interface Catheter Solutions Model WMS-350 is a bench-top measurement system designed specifically for catheter balloons. The system offers a non-contact solution to the typical problems encountered in the dimensional measurement of catheter balloons. By integrating the holding, pressurizing, and movement of the balloon with cutting edge, non-c...
The Interface Model BFM-4410-x3 Computerized Balloon Forming Machine is a bench-top system, designed to handle a wide range of tubing sizes and materials. This includes materials such as Polyethylene (PE), Polyvinyl chloride (PVC), Polyurethane (PU), PET and Polyimides, and amides (Nylons). The BFM-4410 -3x provides the capability to form up to thr...
 The Extrusion Die Stretching Machine (figure 1) performs hot die draw-down of plastic tubing used in catheter production. The process enhances material strength and improves O.D. tolerances. The machine can process up to three tubes in parallel. The typical applications include tubing neck down, balloon tubing pre-stretching, and sheathed balloon...
Figure 1: Balloon Trimmer/Tip Cutter Performs precision square end cuts to specified lengths. Quick and repeatable results on items such as balloon necks and catheter tips. Figure 2: Slitting Fixture. Pneumatic or Manual This fixture is used to make axial slits precisely aligned with the tubing centerline through one wall only - such as for for...
Interface Catheter Solutions offers a full line of Water Jackets to be used with our Balloon Forming Machines. Each Water Jacket accommodates a range of mold sizes. The water jackets are interchangeable and can be installed in minutes. This modular approach allows one to form balloons ranging in size from 1.5mm x 10mm long to 18mm x 247mm long ...
Figure 1: Balloon Trimmer/Tip CutterPerforms precision square end cuts to specified lengths. Quick and repeatable results on items such as balloon necks and catheter tips. Figure 2: Balloon Trimmer/Tip CutterPerforms precision square end cuts to specified lengths. Quick and repeatable results...
Designed specifically for catheter balloons, the Interface Catheter Solutions Length Diameter Measurement System, LDS-320 offers an accurate, non-contact, low-cost technique for catheter balloon dimensional inspection. It eliminates errors associated with manual contact measurements, as well as variations due to operator skills...
The PT-3070 is ideally suited for testing small plastic pressure retaining components such as welded or bonded plastic components and tubing assemblies that are typically encountered in many disposable medical devices, i.e. balloon catheters. Tubing, small valves, fittings, balloons, etc. can be tested for burst, leak, fatigue, ...
The Hydraulic Pressure Testers provide critical hydraulic test functions for balloon catheters and components, including tubing and balloons. The HPT-1000 is easily programmable with a high visibility vacuum florescent display and four navigation keys.Key FeaturesTests include burst, leak, fatigue and complianceMultiple pressure...
The Interface Gas Pressure Leak Tester, Model GPL-5020, is designed for rapid, non-destructive testing of catheters. Its modular construction allows for expanding the number of test ports from one to twenty, in multiples of five. Each test port is fitted with a small isolation solenoid valve, allowing each catheter to be tested ...
The Interface gas pressure leak tester, model GPL-501, is a tabletop machine used for nondestructive leak testing of catheter components using dry nitrogen gas. Nitrogen gas is inert so there is no residue, water spots or water droplets on catheter components, making it ideal for testing of finished devices.SpecsVacuum testRamp ...
Flashless Tipping Thermal Bonding Hole Forming/ Skiving Balloon Forming Coil Winding Catheter Lamination Cut to Length Bonding Skiving/Hole Forming Marker Band Swaging Guidewire Grinding Stent Crimping Balloon Forming, Pleating & Folding Guidewire Microgrinding Burr-Free Needle Pointing ...
1 Liner Stretching 2 Tube Feeding 3 Catheter Cutting 4 Laminating/Reflow 5 Mandrel Removing ...
The Interface Catheter Solutions DFW-1000 dual fluter wrapper is globally recognized for producing low-profile wrapped balloons for catheter manufacturing. It has a top-loading, pivoting catheter platform to precisely control the positioning of the catheter for both fluting and wrapping operations. The DFW-1000 is PLC-controlled with multiple s...