Wire Stripping for Guidewires
Comco, an MMT company, provides MicroBlasting technology that can be used to perform delicate cleaning without damage to the underlying part. Whether you need to strip coatings, remove residues, clean hot runner nozzles, our process is effective, streamlined and safe.
Guidewires
Coatings applied to guidewires enable them to move smoothly throughout the body. However, these smooth coatings are not conducive to bonding the wire to end components. This makes it necessary to remove small sections of the coatings to provide a suitable surface for bonding.
MicroBlasting is an efficient method to safely and effectively remove coatings with a sharp delineation.
How sharp is that delineation? <0.005″
Guidewire Types
A wide range of guidewire size and materials can benefit from the MicroBlasting process.
Stainless steel or nitinol wire diameters typically range from 0.014″ to 0.035″ and the Ring Nozzle can accommodate wire up to 0.125″ in diameter. Guidewires of any length can be accommodated, whether they are standard (145 cm -190 cm) or exchange-length (260 cm – 400 cm).
Coatings which can effectively be removed include: PTFE, PVA, and PEG.
MicroBlasting Method
Equipment: AccuFlo abrasive blaster, ProCenter Plus and Ring Nozzle
Abrasive: Sodium bicarbonate or wheat starch
Pressure: 80 psi
Orifice: 0.040″
Nozzle: Ring Nozzle with 5 x 0.030″
Configured with five Hi/Performance nozzles, the Ring Nozzle is designed to spread the abrasive flow uniformly over a circular cross-section for sharp delineation between the coated and uncoated regions.
Ring Nozzle for Wire Stripping inside Comco's ProCenter Plus
Why MicroBlasting?
The selective cleaning process uses the abrasive qualities of MicroBlasting to carefully erode layers of unwanted material from a base substrate. The process takes advantage of the different physical properties of the two layers. By choosing a sharp soft abrasive, MicroBlasting cuts through the soft ductile coating without damaging the underlying wire. Additionally, MicroBlasting abrasives of choice (sodium bicarbonate or wheat starch) are easily cleaned and biocompatible.
Total Catheter and Guidewire Solutions
Comco’s MicroBlasting systems deliver cutting-edge solutions tailored for guidewire manufacturers. In 2025, MMT acquired Comco, marking a significant expansion of capabilities, allowing both companies to better serve its customers.
MMT offers an extensive array of innovative solutions for catheter manufacturing, automation, guidewires, and abrasives. These exceptional offerings are backed by MMT’s renowned and trusted brands, ensuring you receive the highest quality in every aspect of your production needs.
- View the Tube Feeding page (opens in a new tab)
- View the Tube Cutting page (opens in a new tab)
- View the Liner Stretching page (opens in a new tab)
- View the Reflow & Lamination page (opens in a new tab)
- View the Mandrel Pulling page (opens in a new tab)
- View the Braid Cutting page (opens in a new tab)
- View the Catheter Tipping page (opens in a new tab)
- View the Testing page (opens in a new tab)
- View the Laser Printing page (opens in a new tab)
- View the Pad Printing page (opens in a new tab)
- View the Balloon Preforming page (opens in a new tab)
- View the Balloon Forming page (opens in a new tab)
- View the Stent Crimping page (opens in a new tab)
- View the Thermal Bonding page (opens in a new tab)
- View the Balloon Pleating & Folding page (opens in a new tab)
- View the Pressure Leak Testing page (opens in a new tab)
- View the Marker Band Swaging page (opens in a new tab)
- View the Hole Forming page (opens in a new tab)
- View the Thermal Bonding page (opens in a new tab)
- View the Laser Bonding page (opens in a new tab)
- View the Hot Box Bonding page (opens in a new tab)
- View the Stent Loading page (opens in a new tab)
- View the Stent Crimping page (opens in a new tab)
- View the Pressure Testing page (opens in a new tab)
- View the Sterilization page (opens in a new tab)
Work with our Engineers to Develop the Optimal Manufacturing Solution
Whether you’re developing a complete process or addressing a specific manufacturing challenge, our engineers are ready to help. We understand that no two applications are alike, which is why we work closely with you to identify the solution best suited to your unique requirements.
Product Feature: Comco JetCenter
Built for Abrasive Environments
In an evolution of Comco’s automated MicroBlasting platform, the JetCenter has created new options for manufacturers. In addition to having greater travel, this system is designed to integrate additional types of motion and automation within the blast chamber. JetCenter is your go-to choice for large flat parts, or trays of smaller parts that need to be blasted individually.
The characteristics that make an abrasive a suitable choice for MicroBlasting make the protection of automation challenging. Through our engineering expertise, we’ve designed a system tough enough to withstand the harsh environments of production environments.
The Comco JetCenter provides various benefits to manufacturers, including:
Easy to Use
Designed for production environments, the JetCenter protects against accidental, improper loading of parts or mismatch of programs. Simply select a preset program, load the parts, and you’re ready to begin blasting at the press of a button.
Flexible Design
JetCenter configurations can be developed for a wide range of processes. Our expert engineers can design JetCenter systems to meet exacting standards in the medical, aerospace, electronics, automotive, semiconductor industries, and more.
Works with any Blaster
The JetCenter has been engineered to operate with either the AccuFlo or PowerFlo families of Comco blasters. The AccuFlo model is most commonly used for single nozzle applications. Multiple AccuFlo units or the PowerFlo are recommended for applications requiring multiple nozzles.